Illuminated crosses / illuminated arrows

Illuminated crosses and illuminated arrows
according to RSA 95

New: Also in LED-technology available

The advantages of this technology are obvious:


  • Power consumption is reduced by up to 60%
  • Almost 100% reduction in phantom light because of a design-registered LED prism system
  • Optimum illumination of the lens by the prism system (no individual LEDs are visible)
  • Almost constant light strength, even when accumulator voltage is falling
  • A useful LED life of 8 to 10 years is guaranteed by the manufacturer
  • Very good visibility of the lights, even from the side angle areas

Lightning Arrow Type L 8

As of now the lightning arrow type L 8 is available in a new considerably more inexpensive and simpler variant L 8. This has become possible by an Aluminium-U-profile-construction as well as new control electronics.For the connection of the lightning arrow, type L 8 two fixture systems are available: a) Standard fixture with axis and connection trick toggle; b) Comfort fixture with axis and to three automatically arresting arrow positions.The lightning arrow type L 8 is standard for 12 volt and 24 volt company with dusk automatic (day/night adoption), standard fixture and lamp protection hanger. The illuminated arrow type L 8 is fitted with 8 halogen-/LED-lamps of 180mm in diameter. The blink frequency is between 40 and 45 blinks/min. Complete with cable connection for battery. 

LED-technology Order No.: W 5194L 
Halogen-technology Order No.: W 5193

Transportable Illuminated Cross Type LK 9

The illuminated cross type LK 9 is fitted with 9 halogen-/LED-lamps of Ø180mm in diameter.
Power supply 12V DC or 24V DC.
The control system is provided with a built-in night-time dimming. The blink frequency comes to 40 blinks/min.
Using this illuminated cross you can secure your vehicle properly on emergency stopping lanes. By means of a mounting bracket the illuminated cross can be hung on the back tail gate of a truck.

LED-technology Order No.: W 5210L
Halogen-technology Order No.: W 5210

Transportable Illuminated Cross Type L 15
according to RSA 95

The illuminated arrow type L 15 is fitted with 15 halogen-/LED-lamps of 180mm in diameter. 
Power supply 12V DC or 24V DC.
The control system is provided with a built-in night-time dimming. The blink frequency is between 40 and 45 blinks/min. The three models of the illuminated arrow (blinking, indicating left, indicating right) are operated via a standard cable remote control.
By means of a mounting bracket the illuminated arrow can be hung on the back tail gate of a truck.

LED-technology Order-No.: W 5200L
Halogen-technology Order-No.: W 5200

Lifting and lowering device for illuminated arrows

Electric lifting and lowering device for our illuminated arrow type L 15. Mounted on a frame. For fastening to your roof rack. The electric lifting and lowering function is triggered automatically when the illuminated arrow is switched on by means of the remote control supplied with the illuminated arrow. The lifting and lowering device is supplied without illuminated arrow and without vehicle-specific roof rack. 

Connection voltage: 12 V or 24 V.
Dimensions: 1020 x 1000 x 310 mm (L x W x H)
Weight: 20 kg
Best.-Nr.: W 5260

Self-sufficient with PB solar technology

The new solar technology by Peter Berghaus means that mobile road safety products, such as our LED advance warning lights, can now be completely self-sufficient.
Solar and battery technology geared especially to continuous operation, in combination with the extremely low power requirement of our LED technology, provides a lasting, reliable power supply. Up to now, the batteries weighing up to 50 kg each had to be changed every week, usually entailing the dangerous procedure of crossing the lanes of motorways in the face of on-coming traffic; at long last, this will no longer be necessary. Hard cash can be saved with the solar panel in next-to-no time, simply from the considerably reduced service workload.

The top quality solar module, developed specially for remote applications in signal systems, provides a maximum output of about 95 watt as the reliable supply for mobile road safety products, and also recharges handy 12 volt batteries. This warrants uninterrupted continuous operation even at night or during a period of bad weather.

The laminate of the solar module is enclosed in a robust aluminium frame. It turns through 360° on its bracket for ideal alignment towards the sun. The cells are embedded between a hardened glass cover and EVA casting compound and sealed with PET film on the back for protection against the toughest climatic conditions. The top quality water-proof solar charge controller with clear multi-coloured LED display offers reliable battery charging, naturally also with protection from overcharge and total discharge. It is therefore now possible to use handy 12 volt rechargeable batteries for long, practically maintenance-free operating periods.

Whether the solar option is used for mobile traffic light systems using LED technology at great distances from the power grid, or for LED advance warning lights on the motorway, particularly when these are positioned on the inaccessible central reservation, the new solar technology is a reliable alternative to the weekly task of changing batteries in installations on roads and motorways!

LED advance warning light 12 volt Order No.: W 5305L 

60x60mm holder for adv.warning light Order No.:EP6075

Solar panel with 60x60 mm holder Order No.: PB 4851 

Charge controller unit (waterproof) Order No.: PB 4860

 

 

Lightning Arrow Type L 8

Lightning Arrow Type L 8

Transportable Illuminated Cross Type LK 9

Transportable Illuminated Cross Type LK 9

Transportable Illuminated Cross Type L 15 according to RSA 95
Transportable Illuminated Cross Type L 15 according to RSA 95

Transportable Illuminated Cross Type L 15 according to RSA 95

Lifting and lowering device

Lifting and lowering device

Self-sufficient with PB solar technology

Self-sufficient with PB solar technology