Working vehicles used for the construction, maintenance and cleaning of roads and road systems and for winter maintenance must be equipped with a red / white / red safety marking according to DIN 30710; this also applies when special rights are granted as per § 35 para. 6 StVO (e.g. driving and stopping on all parts of the road in any direction at any time).
When the RSA was published in 1995, this already standardised the warning features to
be used on working and safety vehicles throughout Germany. In contrast to rotating beacon warning lights, the yellow warning lights, lighting cross LK9 or lighting arrow L15 which are also used on such vehicles in addition to the red / white / red warning markings are not,
as frequently incorrectly presumed, part of the vehicle lighting system but specified as
„additional safety gear“ as per RSA (Part A 7.1 [7e]). They can be used on all working and safety vehicles marked according to § 35 StVO.
Protect your staff and your equipment, and give road users a professional warning!
BASt test no.: V4-55-2010
With 8 mounted LED lamps in ultra-flat housing, 200 mm Ø, yellow, for 12 V or 24 V operation. Mounted on a frame. In the middle on the back there is a turning device to turn the arrow to point to the right or left. Also with night-time reduction feature. With 4.5 m connection lead and battery clamps. [...more]
BASt test no.: V4-55-2010
With 9 ultra-flat LED lamps mounted on a profile frame, 200 mm Ø, yellow. Also with night-time reduction feature. Flashing fre-quency
approx. 40 flashes/min. This illuminated cross lets you safeguard
your vehicle correctly on the hard shoulder. It is fitted with a bracket and can be hung easily in the rear tailgate of a truck, for example. [...more]
BASt test no.: V4-55-2010
With 15 ultra-flat LED lamps mounted on a profile frame, 200 mm Ø, yellow, with fixture and cable remote control (cable 15 m long) for 12 V or 24 V operation. The corresponding arrow direction or the illuminated cross can be selected electrically using the remote control. Also with night-time reduction feature. The illuminated arrow can be used by simply hanging it from the rear tailgate of a truck and connecting up to the battery in just a few seconds. [...more]
Electric lifting and lowering device on a flat frame. For fastening to your roof rack. The electric lifting and lowering function is trig-gered auto-matically when the illuminated arrow is switched on by means of the remote control supplied with the illuminated arrow. The lifting and lowering device is supplied without illuminated arrow and
without vehicle-specific roof rack. [...more]
BASt test no.: V4-55-2010 (lamps 200 Ø); V4-69-2011 (lamps 340 Ø)
Illuminated arrow L 15 LED with cable remote control and 8 m power
cable, including two LED flash lights 340 mm Ø, permanently connected to the controller with two connection leads (each 1 m long) with 4-pin plug, operating voltage 12 V or 24 V, including undervoltage protection and reverse polarity protection together with night-time reduction feature.
Mean power consumption (12 v): approx. 3.35 A, (24 V): approx. 1.58 A
Top element made of steel for fitting in the illuminated arrow frame to accommodate the two flashlights when using a flat lifting and lowering device (W 5260C).
Additional support for 2 LED flash lights 340 mm Ø, only necessary when using the electric or mechanical lifting and lowering de-vice
in picture 21. The additional support is inserted in the lifting and lowering device to hold the two flashlights in lowered state.
[...more]
LED sub-matrix with lifting and lowering device in powder-coated stainless steel frame. LED symbol tested as per EN 12966, speci-ally for fast protection of construction sites: arrow left, arrow right, cross and road signs: roadworks 123, congestion 124 and ha-zard 101, with orange LED flashlights in each case.
Lifting, lowering and image selection with the supplied LCD control device, by radio control without cable lead between LED panel and control device, only 12 V operating voltage has to be supplied in each case.
Supplied without vehicle-specific roof rack. [...more]
Switchable MobiLED symbols / Radio-controlled MobiLED LCD control device
MobiLED – mobile alternating traffic sign – full matrix as MobiLED, but with freely programmable full matrix. [...more]
Radio-controlled MobiLED LCD control device
BASt test no.: V4-69-2011
Synchronous blinking system for 12 V or 24 V consisting of two LED blinking lamps 340 mm Ø, for permanent connection, with 13 m connection lead, including undervoltage protection and reverse polarity protection together with night-time reduction feature. The lamps are fastened with 4 rubber pads with M8 thread.
Synchronous blinking system with two LED blinking lamps but ultra- flat 200 mm Ø, otherwise function and equipment as order no. W 5276A. The lamps are fastened with 4 rubber pads with M6 thread. [...more]
BASt test no.: V4-69-2011
Alternating blinking system for 12 V or 24 V consisting of three LED blinking lamps 340 mm Ø.
Alternating blinking system with three LED blinking lamps but ultra-flat 200 mm Ø, otherwise function and equipment as order no. W 5283LB. The lamps are fastened with 4 rubber pads with M6 thread.
Mounting plate for flat advance warning lamps and flashlights
for fastening the lamps 340 mm Ø to 40 x 40 mm square tube or round tube with 52 mm Secura bracket.
for fastening the ultra-flat lamps 200 mm Ø to 40 x 40 mm square tube or round tube with 52 mm Secura bracket.
. [...mehr]
as per DIN 30710, foil type II,
as per DIN 67520 Part 2, self-adhesive, flexible, removable
Vehicle safety marking
as above but on magnetic foil
[...more]
12 V, with halogen lamp H1: 12 V / 55 W
24 V, with halogen lamp H1: 24 V / 70 W
[...more]
Design with LED lamp, multi-voltage: 12 / 24 V
[...more]
Double flashlight with system of 3 magnets – TÜV-tested up to 250 km/h; flashing frequency: double flash >2 Hz; multi-voltage: 9 to 32 V. [...more]
[...more]
[...more]
